!!CURRENT RELEASE of the 4352/4353 1xRTT AMPS/CDMA/FEX SOFTWARE!! ---------------------------------------------------------------------- Versions: SCP 5.5, AMPS 5.1, CCMMIC 5.2, CCMDSP 5.2 ---------------------------------------------------------------------- ****** Software Upgrade Notes ****** Thank you for taking this opportunity to upgrade your 4352/4353 with 1xRTT to the latest version of software. You should upgrade your unit to the current version regardless of whether you are experiencing problems or not. You will find a copy of the installation instructions (the file labeled 435xRUPG.txt) in the System1 folder. Please read the installation instructions carefully. ********************************************************************** NOTE: Downloading and executing the file 4351xRTT55.exe will extract all software upgrade files to three folders in the C:\Temp folder, labeled "System1", "System2" and "Test". NOTE: You can verify which options are installed in your 435X by pressing the key and then the key ********************************************************************** After extracting the files perform the following: 1) Open the C:\Temp folder on your PC, open the "System1" folder and copy the files to a floppy disk. Label this disk "1xRTT System" 2) Copy the files in the "System2" folder to a floppy disk. Label this disk "1xRTT CCM". ********************************************************************* NOTE: If you have a Custom Test and/or Composer file use them instead of the defaults supplied here. Your Custom Test will probably not support 1xRTT tests unless recently modified by Willtek. ********************************************************************* 3) Copy the files in the "Test" folder to a floppy disk. Label this disk "Test". 4) Open the "4352 Composer" or the "4353 Composer" folder from the "Test" folder and copy the composer.csl file to the "Test" disk. 5) Now access the "System1" folder on your PC, and open the file "435xRUPG.txt". Follow the installation instructions. --------------------------------------------------------------------- If you have any questions about the software installation process or operation of your 4352/4353, please contact the Wireless Technical Assistance Center at 973-386-9696. Email: support.us@willtek.com ---------------------------------------------------------------------- Release History ---------------------------------------------------------------------- Release 5.5 – June 2007 LATEST RELEASE Added support for CDMA - MEID mobiles Release 5.4 – Aug 2004 LATEST RELEASE Improvements in AMPS hardware defect testing Updated Manufacturer’s Code list Release 5.3 – Dec 2003 Minor changes to FER measurements Minor changes to Waveform Quality measurements Updated Manufacturer’s Code list Release 5.2 - May 2003 Service Option 32 (TDSO) testing capabilities added Updated Manufacturer’s Code List Release 5.1 - March 2002 Test Sequence allows testing/identification of 1xRTT capable mobiles Audio Measurement speed increased Willtek Communications, Inc. readme.txt 27 Sep 2004/jaw